Traffic steering

Magic WAN uses a static configuration to route traffic through Anycast tunnels using the GRE and Internet Protocol Security (IPsec) protocols from Cloudflare’s global network to your network, and from your network to Cloudflare’s global network.

Magic WAN steers traffic along tunnel routes based on priorities you define in the Cloudflare dashboard or via API.

The example in this diagram has three tunnel routes. Tunnels 1 and 2 have the top priority routes, and Tunnel 3 has a secondary priority route.

When there are multiple routes to the same prefix with equal priority and different next-hops, Cloudflare uses equal-cost multi-path (ECMP) routing. An example of multiple routes with equal priority would be Tunnel 1 and Tunnel 2.

The use of ECMP routing provides load balancing across tunnels with routes of the same priority.

​​ Equal-cost multi-path routing

Equal-cost multi-path routing uses hashes calculated from packet data to determine the route chosen. The hash always uses the source and destination IP addresses. For TCP and UDP packets, the hash includes the source and destination ports as well. The ECMP algorithm divides the hash for each packet by the number of equal-cost next hops. The modulus (remainder) determines the route the packet takes.

Using ECMP has a number of consequences:

• Routing to equal-cost paths is probabilistic.
• Packets in the same session (or flow) with the same source and destination have the same hash. The packets also use the same next hop.
• Routing changes in the number of equal-cost next hops can cause traffic to use different tunnels. For example, dynamic reprioritization triggered by health check events can cause traffic to use different tunnels.

As a result, ECMP provides load balancing across tunnels with the same prefix and priority.

​​ Examples

This diagram illustrates how ECMP distributes traffic equally across two paths with the same prefix and priority.

​​ Normal traffic flow

When Magic WAN health checks determine that Tunnel 2 is unhealthy, that route is dynamically de-prioritized, leaving Tunnel 1 with the sole top-priority route. As a result, traffic is steered away from Tunnel 2, and all traffic flows to Tunnel 1.

​​ Failover traffic flow: Scenario 1

Customer router failure

When Magic WAN determines that Tunnel 1 is unhealthy as well, that route is also de-prioritized, leaving Tunnel 3 with the top priority route. In that case, all traffic flows to Tunnel 3.

​​ Failover traffic flow: Scenario 2

Intermediary ISP failure

When Magic WAN determines that Tunnels 1 and 2 are healthy again, it re-prioritizes those routes, and traffic flow returns to normal.

​​ ECMP and bandwidth utilization

Because ECMP is probabilistic, the algorithm routes roughly the same number of flows through each tunnel. However it does not consider the amount of traffic already sent through a tunnel when deciding where to route the next packet.

For example, consider a scenario with many very low-bandwidth TCP connections and one very high-bandwidth TCP connection. Packets for the high-bandwidth connection have the same hash and thus use the same tunnel. As a result, that tunnel utilizes greater bandwidth than the others.

​​ Application-aware policies

By default, Cloudflare balances and steers traffic based on network-layer characteristics (IP, port etc). If you are using the Magic WAN Connector, you can also steer traffic based on well-known applications. Application-aware policies provide easier management and more granularity over traffic flows.

For more information, refer to Applications and app types.